Advice needed for motor / esc

[900dukess]

Hi all, I know this question gets asked all the time but I am helping my neighbour upgrade his SC
He will be using a dx6i, I am after advice on which turnigy brushless motor to get. I have a parkzone 480 but was looking for something with similar power, but less power than a 35-36. Also what Esc and prop set up would help. Looking at getting everything from hobbyking. Also what servo can u guys recommend, thanks in advance. Oh yer he is also looking at using his existing 1300 mah zippy batteries 20c/25c I think, so keep this in mind regarding prop size, like to get 10 min flight time

[900dukess]

Oops just noticed I posted in wrong section, sorry, but advice would be appreciated

[ginginho]

Looking at the battery size and the flight times required, your neighbour will either have to be rather good at catching thermals or use a low power set up to be able to do both.

As for motors, where would you source it, HK or do you have local suppliers, web or otherwise? If local, then what manufacturers do they stock.

[cubcruncher]

Hi

THe battery will limit the set up to a motor that pulls less than 19.5 amps max so the turnigy 35-30 1100kv

www.giantcod.co.uk/xyh3530-1100kv-brushless-outrunner-p-402740.html

or a clone of should just about do it, others will be more precise as I'm no expert.

regards

James