Ailerons Cut!

[toff]

Arrghhoooo....Oh lordy. Go onto ebay and buy some 6mm carbon rod. cgi.ebay.co.uk/CARBON-TUBE-6mm-Pushrods-Kites-shock-Flyers-RC-etc-/270548534925?pt=UK_ToysGames_RadioControlled_JN&hash=item3efdf3068d
Cut a straight groove down the middle of your wing and epoxy this in ( while making the wing flat on a flat surface with heavy books, or similar flat things that won't mark the foam)
Once dried your wing will be flat, and once the servos and linkages are in place, your ailerons will work perfectly! Do not fit the outrunner yet. Get used to your new SC aileron mod and the wonderful things it can do! Once you know what it can do, you can fit the outrunner. The inceased power and lift is unbelieveable! And then smash it up, caused by interference, and loss of control..... just like me!

[ginginho]

The big fish also do carbon rods at a very good price, see here . Stock does'nt last long as it's the cheapest in the UK (certainly that I could find).

[pauliepilot]

Sounds gd to me..im off to the lhs later i'll try n pick some up,as for brushless it allready has a 30/29 fited in the sc gear box running a 9x7.5 prop even tho it js makeing my overlander 2200s a little hot!

[ginginho]

Feb 11, 2011 11:49:55 GMT 1 pauliepilot said:

Sounds gd to me..im off to the lhs later i'll try n pick some up,as for brushless it allready has a 30/29 fited in the sc gear box running a 9x7.5 prop even tho it js makeing my overlander 2200s a little hot!

If they are getting hot, you are likely to be overdriving them. While at the LHS, get a wattmeter if you don't already have one.

[john66]

Paul, when I search for you as a user on photobucket I cannot find you. Could you post a link here?

I havent done the dihedral removal myself yet, but plenty have here. Im sure someone can advise.

John

[ginginho]

Fly did a "how-to" ages ago, I used that for mine.

[pauliepilot]

Pauliopilot not pauliepilot! Will try a link...can't link my phone won't let me???

[john66]

Feb 11, 2011 16:47:44 GMT 1 pauliepilot said:

Pauliopilot not pauliepilot! Will try a link...can't link my phone won't let me???

Aaaaah, gotcha!

John

[pauliepilot]

Confuseing i no,but it wouldn't let me have paulie so changed it to paulio enjoy lol :-)
Went to lhs penn models n didn't get cf rod in the end think i wont bother witb flating wing..i'll just put flaps on?somethink to do while i wait a couple of months n try a heli blade450

[pauliepilot]

Look what iv done pauliopilot photobucket!!!

Oh well she's all fixed n still flys :-)