|
|
Post by garvey76 on Aug 7, 2007 12:12:13 GMT 1
Got 2x 9 cell 1000 mah from my pz stang and really want to put em in my cub. Has any one done this, got any pics or got any ideas where i can fit them. I know there a bit heavy but i think it will be OK. Not got the skill to upgrade to brushless and lipos  |
|
|
|
Post by mrmugen on Aug 7, 2007 12:25:29 GMT 1
Go for it. All you have to do is carve a little out of the battery box on one end or the other. Try to put the extra weight forward rather than aft.
|
|
|
|
Post by garvey76 on Aug 7, 2007 13:03:26 GMT 1
Been looking at the obvious battery box mod and it also means taking some foam away.
Not that this is a problem, just dont want the 8 cells i use moving aroung too much.
thought about putting them where the drop module would sit.
fix it on the out side with velcro!
|
|
|
|
Post by mrmugen on Aug 7, 2007 13:07:31 GMT 1
Thats sort of odd but anything is posssible. There should be some velcro in there to strap your 8 cell in with.
|
|
|
|
Post by SCC on Aug 7, 2007 14:49:24 GMT 1
Been looking at the obvious battery box mod and it also means taking some foam away. Not that this is a problem, just dont want the 8 cells i use moving aroung too much. thought about putting them where the drop module would sit. fix it on the out side with velcro! Epoxy a piece of Velcro to the bottom of the battery box, put a piece of Velcro on your 8 cell and if you use the Velcro strap as well the 8 cell will not move anywhere, even if Maria is flying. ;D |
|
|
|
Post by garvey76 on Aug 7, 2007 15:49:13 GMT 1
Been looking at the obvious battery box mod and it also means taking some foam away. Not that this is a problem, just dont want the 8 cells i use moving aroung too much. thought about putting them where the drop module would sit. fix it on the out side with velcro! Epoxy a piece of Velcro to the bottom of the battery box, put a piece of Velcro on your 8 cell and if you use the Velcro strap as well the 8 cell will not move anywhere, even if Maria is flying. ;D ;D ;D Trust me if Maria was flying, it would move. Going to play around over weekend and see what i come up with. Thanks for the ideas. Velcro and epoxy seem and good start. |
|
