|
|
Post by cshepard2 on Jan 9, 2008 3:36:23 GMT 1
I have a Hobbyzone Super Cub. My freind recently gave me his smashed Parkzone Focke Wulf 190. Will the battery out of the Wulf work in my cub without messing any of my electronics up?
|
|
theriaa
Flight lieutenant
Posts: 89
|
Post by theriaa on Jan 9, 2008 4:24:37 GMT 1
its a 10.8v pack i see, i think it would work without taking out the jumper, but take it out 1st just to be sure.
the jumper is on the rx in the cub, right next to where the x-port wire plugs into, just take it out with tweezers and try that, i assume it has the same connector?
|
|
|
|
Post by cshepard2 on Jan 9, 2008 4:35:40 GMT 1
yes it has the same connector. will my stock batteries work with the jumper off also?
|
|
|
|
Post by duck9191 on Jan 11, 2008 4:09:48 GMT 1
the jumper raises the low voltage cut off, which will cut the power to the motor when the battery drops to a cretin voltage, and with the stock battery the voltage would be below the cut off. the jumper is more for lipos which shouldnt be discharged below 3 volt per cell or so.
|
|
