Post by rick88ss on Jul 1, 2007 18:16:53 GMT 1
My new super Cub Feigao 1308412L BL inrunner with Himax gearbox 6.6:1, APC 10x3.8 SF prop, 3s lipo 11.1 2100mAh, Tower Pro 30A ESC.
I used the stock motor mount but cut off the front snout, epoxied and screwed in a 1/8" plywood piece, and mounted an E-Flite stick mount to the plywood. I did it this way to retain the thrust angles that are buit in to the stock motor mount/GB housing. Maidened her today and all went pretty smooth.
I used the stock motor mount but cut off the front snout, epoxied and screwed in a 1/8" plywood piece, and mounted an E-Flite stick mount to the plywood. I did it this way to retain the thrust angles that are buit in to the stock motor mount/GB housing. Maidened her today and all went pretty smooth.
