rclud
Flying officer
Posts: 8 
|
Post by rclud on Oct 26, 2014 12:51:30 GMT 1
~Mounting X Bracket To Motor~ When you bolt the “ X Mounting Bracket to the motor. Do you suggest to use a dab, of Loctite to the “Bolts Thread” or do find it is not needed to use Loctite? Thank you for your time..  ~Thomas~ |
|
|
|
Post by pasquale91 on Oct 26, 2014 14:11:04 GMT 1
If you do use loctite on the threads.
Be sure to use the blue loctite if you wish
to remove the screws at a later date.
They probably will not come off with the red.
|
|
|
|
Post by Knackered Sailor on Oct 26, 2014 18:10:18 GMT 1
They don't seem to have used it when factory assembling so I suggest not necessary.
|
|
rclud
Flying officer
Posts: 8
|
Post by rclud on Oct 26, 2014 20:06:51 GMT 1
They don't seem to have used it when factory assembling so I suggest not necessary. OK thank's, perhaps that the electrics run smoothly, I will not need the, Loctite... |
|
|
|
Post by hghost on Oct 27, 2014 5:00:35 GMT 1
A suggestion would be to use a little normal white foam glue or normal elmers glue...right against the nut...it will not hold to metal per say to glue it solid
but it will make enough of a binding agent to keep nut from vibrating loose or backing off.
Will not stop you from taking it off later if need be.
|
|
