|
|
Post by ericsnnc on Aug 15, 2014 22:20:12 GMT 1
Y'all got any tips on how to remove all the stock decals on the SC? I want to take all the original decals off and paint my SC and want to know how others have done it. I am concerned about damaging the foam when taking the original decals off.
|
|
|
|
Post by renard80 on Aug 15, 2014 23:07:54 GMT 1
They usually peel off fairly easily.
They may curl up when removed, especially the long wing and fuselage strips. To prevent this, be sure to have something ready at hand to stick them on temporarily. A shiny plastic surface is OK - just gently 'touch stick' them, don't stick 'em down hard!
|
|
|
|
Post by coupe1942 on Aug 16, 2014 10:40:30 GMT 1
Mine came off when I lifted up a corner with a razor knife. As difficult they were to remove on my SC's, they were practically jumping off on their own on my two Bixlers. WD40 spray is sometimes used on auto stickers, but not sure how effective it would be on the foam and these stickers. Good luck with it and let us know what you succeeded with.
|
|
|
|
Post by pasquale91 on Aug 27, 2014 13:11:12 GMT 1
Yep, they just peel right off,
ours wouldn't stick to anything after they came off.
|
|
