|
|
Post by sasquatchelnacho on Jul 9, 2013 0:37:23 GMT 1
I am from Fresno,Ca and just getting in to flying I have a cub and want to see about change to a lipo battary and how do I go about it any infor or direction would help.
|
|
|
|
Post by kenninny on Jul 9, 2013 19:40:27 GMT 1
If Im reading this right, it sounds like you have the older red cub, if so pull the jumper, follow
the sensor wire to were they pulg in, you will see a black tab with a metal strip across it, pull it with
needle nose pliers, then you can use a 1300mah battery, you have to change the connector on the esc
to match the battery, also down size the prop to 9x6
|
|
|
|
Post by sasquatchelnacho on Jul 11, 2013 0:20:29 GMT 1
Yes it is the red cub and I will do that thank you very much for the help.
|
|
|
|
Post by kenninny on Jul 11, 2013 19:44:23 GMT 1
Glad to be of assistance, unplug the sensor, they do more to make you crash than to save you from a crash
|
|
