Post by toff on May 4, 2012 22:26:34 GMT 1
Just accidently dropped my trusty dx6i, and have knocked something off.
Its a bit battered at the moment, so a (metaphoric) spring clean with new bits is in order.
1) Antenna - Mrs broke it chucking it in with those' bloody planes!'
www.ebay.co.uk/itm/SPEKTRUM-ANTENNA-SPMR75000-DX2-DX3-DX6-DX6i-DX7-/190648149560?pt=UK_ToysGames_RadioControlled_JN&hash=item2c6383e638
2) Trim tabs - broken/ weakened and reinforced - but wearing out again
www.ebay.co.uk/itm/SPEKTRUM-DX6I-BLACK-REPLACEMENT-TRIM-BUTTONS-/120892839582?pt=UK_ToysGames_RadioControlled_JN&hash=item1c25c6569e
3) Landing gear switch ( switch and pot assembly?) - Unable to locate any replacements, although browsing online I notice that the US brothers use radio shack ( could I just order a normal switch from online Maplins- It is just an up/ down switch?)
4) Power - bit of a difficult one this - I could go for eneloops www.ebay.co.uk/itm/4-x-SANYO-ENELOOP-2000-mAh-AA-RECHARGEABLE-BATTERIES-FREE-CLEAR-BATTERY-CASE-/330706406484?pt=UK_ConsumerElectronics_Batteries_SM&hash=item4cffa34c54
or there is a 2s lipo mod, which seems to work:
2s 900mah lipo: www.rcheliaddict.co.uk/transmitters-receivers/20297-dx6i-rechargable-battery-3.html
Finally - Huge biggy - the roller is starting to go - still moves, not broken, but harder and harder to click.
Now - I know I can order an aluminium roller from eastrc.org, www.eastrc.org/estorerollerbutton.htm
but it's $14.99 with $12.99 shipping - JEEBUS - the radio only cost 80 pounds when I got it!
Yep. I know I should get a new DX7/DX8/ DX10t/ DX18 - but I do not have any 'real' spare money at the moment, hence parts'n'bits.
If I can get help from y'all, I'll try and organise it, and present it as a DX6i replace/ repair guide.
Its a bit battered at the moment, so a (metaphoric) spring clean with new bits is in order.
1) Antenna - Mrs broke it chucking it in with those' bloody planes!'
www.ebay.co.uk/itm/SPEKTRUM-ANTENNA-SPMR75000-DX2-DX3-DX6-DX6i-DX7-/190648149560?pt=UK_ToysGames_RadioControlled_JN&hash=item2c6383e638
2) Trim tabs - broken/ weakened and reinforced - but wearing out again
www.ebay.co.uk/itm/SPEKTRUM-DX6I-BLACK-REPLACEMENT-TRIM-BUTTONS-/120892839582?pt=UK_ToysGames_RadioControlled_JN&hash=item1c25c6569e
3) Landing gear switch ( switch and pot assembly?) - Unable to locate any replacements, although browsing online I notice that the US brothers use radio shack ( could I just order a normal switch from online Maplins- It is just an up/ down switch?)
4) Power - bit of a difficult one this - I could go for eneloops www.ebay.co.uk/itm/4-x-SANYO-ENELOOP-2000-mAh-AA-RECHARGEABLE-BATTERIES-FREE-CLEAR-BATTERY-CASE-/330706406484?pt=UK_ConsumerElectronics_Batteries_SM&hash=item4cffa34c54
or there is a 2s lipo mod, which seems to work:
2s 900mah lipo: www.rcheliaddict.co.uk/transmitters-receivers/20297-dx6i-rechargable-battery-3.html
Finally - Huge biggy - the roller is starting to go - still moves, not broken, but harder and harder to click.
Now - I know I can order an aluminium roller from eastrc.org, www.eastrc.org/estorerollerbutton.htm
but it's $14.99 with $12.99 shipping - JEEBUS - the radio only cost 80 pounds when I got it!
Yep. I know I should get a new DX7/DX8/ DX10t/ DX18 - but I do not have any 'real' spare money at the moment, hence parts'n'bits.
If I can get help from y'all, I'll try and organise it, and present it as a DX6i replace/ repair guide.