|
|
Post by spar on Dec 16, 2007 23:03:53 GMT 1
I have a DX6 transmitter (for another plane) that came with some servos. Part of me is tempted to transplant them in my Super Cub, but part of me is tempted just to leave the Super Cub the way it is. I figure I can give it to my adult son or other beginning flyer. Still, I'd like to put the servos in a plane. If I don't upgrade my SC, what plane is the logical next step up? Maybe something with ailerons.
|
|
|
|
Post by mrmugen on Dec 16, 2007 23:11:15 GMT 1
Do you want to stay foam? Have you thought about balsa? There are a bunch of good trainers that are balsa. If your a good pilot you may enjoy the flight of balsa. Kevin
P.S. Moding the SC is fun to do. Also ailerons on it are a blast...
|
|
|
|
Post by mararra on Dec 16, 2007 23:53:23 GMT 1
This is what I did for a second plane:http://www.stevensaero.com/shop/product.php?productid=19038&cat=254&page=1 Basically two reasons. Wanted an easy aileron trainer and somethin to ease into the buildin part of this hobby. If your interested you can check my posts on the plane building thread : supercubclub.proboards78.com/index.cgi?board=pb&action=display&thread=1195349838Almost finished with the build, but haven't flown it yet. Update soon! M |
|
|
|
Post by spar on Dec 17, 2007 0:16:07 GMT 1
Do you want to stay foam... balsa? Given that choice, foam seems more appealing than balsa. Guess I'm not an ace pilot, yet. Are there any flat foam planes that people recommend? Something that is Super Cub-like? |
|
|
|
Post by mrmugen on Dec 17, 2007 1:00:50 GMT 1
www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKVY7&P=0This plane is a great plane but it is not a floater. It will go where ever you point it. I have one and have crashed the snot out of it. It is the easiest plane to fix....just have hot glue with you. It is flexible so crashes are not nearly as bad as a stiff foam plane. It is my first and most favorite plane to fly. I always start out with it when I hit the field to warm up. It can fly in a pretty good wind too (20mph is a blast). Flat foam planes for the most part are indoor planes. They can be flown outside but the conditionsa must be calm. I will look for the other plane I wanted to show you and post it shortly. Kevin P.S. Are you wanting a top wing only?
|
|
|
|
Post by spar on Dec 17, 2007 1:38:07 GMT 1
Are you wanting a top wing only? I have never flown a low wing plane before so I am open minded about this. The high wing planes I hear are more stable so I'm probably better off there until I master ailerons. I do prefer a brushless motor, though. |
|
|
|
Post by mrmugen on Dec 17, 2007 3:49:45 GMT 1
www.horizonhobby.com/Products/Default.aspx?ProdID=EFL2250This plane rocks! You will get the benefits of a top wing, and the aileron training, and 3d if you want. this plane can do it all. I have it's big, big brother the Ultra Stick 120 Lite with a 26cc gas engine on it. I think you'd enjoy it....oh wait you said foam...duh! I will do some more looking for the foam plane I was looking for when I found this one. I may get this one for me... 
|
|
|
|
Post by flydiver on Dec 17, 2007 8:03:19 GMT 1
For a tough foam plane having ailerons that flies like the next step up from a SC you might consider the Multiplex Minimag. The stock motor needs replacement (wimpy direct drive 400), otherwise it's fine.
fly
|
|
|
|
Post by flydiver on Dec 17, 2007 8:05:59 GMT 1
That site actually recommends NOT using brushless. Stock is [370 size with ball bearings and 5:1 gearbox]. Did you go with that? Fritz |
|
|
|
Post by mrmugen on Dec 17, 2007 13:18:53 GMT 1
flydiver- always go brushless not matter what they say....lol. I do not run brushed motors so it was a no brainer for me. I used a bl motor asap and got great results. Kevin
|
|
|
|
Post by SCC on Dec 19, 2007 10:40:16 GMT 1
I have a DX6 transmitter (for another plane) that came with some servos. Part of me is tempted to transplant them in my Super Cub, but part of me is tempted just to leave the Super Cub the way it is. I figure I can give it to my adult son or other beginning flyer. Still, I'd like to put the servos in a plane. If I don't upgrade my SC, what plane is the logical next step up? Maybe something with ailerons. Hi spar. Leave the Cub as it is. I did all the upgrade stuff and enjoyed doing it, but now it's back to stock and running on lipo and thats the way i like it. For your next plane . If your confident with your SC, i would not hesitate in recommending the Mini pulse XT or Multiplex Gemini. The E flite Taylorcraft looks like a great plane to have. I wish they were available in Europe. When they are it shall definitely be in my hangar. |
|
|
|
Post by rcairplanepilot on Dec 29, 2007 8:35:47 GMT 1
hi, well the brand news wore off,an i still like the way the SC flys"even stock" , its a hoot in wind, and the fact that parts are easy to get an are cheap is a BIG plus. today i said the heck with it, took all the junk toy stuff outta it an went brushless. gonna put some carbon fiber here an there, with some 3M extreme strapping tape, and just start flying the liveing crap outta it. and have some FUN!!!
|
|
