Post by crashedagain on Oct 24, 2007 21:30:47 GMT 1
Hey Everyone. I am new to the site and hobby. So here is where i now stand, as far as my flying/modification career (of SC's go). On the 2nd flight of my SC (a week after i had it) it did a full throttle nosedive from about 20 ft up. The fuselage cracked in two spots, but did not separate. The engine mount is broken (motor is actually in pieces) and the pinion shaft is bent. The wing also broke clean off. i think the pins where the rubber bands attach are also broken...well the foam is broken where the pins attach, but the pins are intact. The battery cage is also looking like a piece of freight hanging off the belly of the plane. The foam is completely chewed up in this area (where the batt-cage attaches to the body).
Well, i have completely sweet-talked my wife into buying me (making a budget available) all the replacement pieces from Amazon, including a new fuselage.
Here is where I have a predicament that someone with experience may be able to help. Do i use the new fuselage as a perfect stock plane and do all my mods to the broken one, or vice versa? I never intended to do any types of mods, but after reading through all these posts, I am geeked about trying new stuff. even more now, since i have a secondary craft i can screw around with. So again, which craft do i mod? the already broken one? or the new one?
My concerns about the mod-ing the broken one is that i'll be using so much crap (epoxy etc.) on it is that if its modified, it may fly all screwy. But I also hate to mess with a perfectly good plane, hence my hesitance to modify the new one. Any suggestions will be appreciated.
Also, I've already told the wifey that its a cheap hobby, but so far she has seen me buy almost two whole planes, (in two weeks). I'll have to lay low for a while before i can create a budget for mods. Anyone else have budgeting issues, or am i the only broke one here?
Well, i have completely sweet-talked my wife into buying me (making a budget available) all the replacement pieces from Amazon, including a new fuselage.
Here is where I have a predicament that someone with experience may be able to help. Do i use the new fuselage as a perfect stock plane and do all my mods to the broken one, or vice versa? I never intended to do any types of mods, but after reading through all these posts, I am geeked about trying new stuff. even more now, since i have a secondary craft i can screw around with. So again, which craft do i mod? the already broken one? or the new one?
My concerns about the mod-ing the broken one is that i'll be using so much crap (epoxy etc.) on it is that if its modified, it may fly all screwy. But I also hate to mess with a perfectly good plane, hence my hesitance to modify the new one. Any suggestions will be appreciated.
Also, I've already told the wifey that its a cheap hobby, but so far she has seen me buy almost two whole planes, (in two weeks). I'll have to lay low for a while before i can create a budget for mods. Anyone else have budgeting issues, or am i the only broke one here?