|
|
Post by not so newbie on Apr 25, 2011 3:53:56 GMT 1
:)has anyone used this motor on theyre cub? i finished my upgrade the other day but havnt tried it yet because of the weather. feedback please  |
|
|
|
Post by supercubnz on Apr 26, 2011 8:06:14 GMT 1
Try the following in YouTube for a good example
" Super Cub with Aileron Prototype Maiden Fly"
I am waiting for the engine mount for the brushless upgrade with the park zone 480 motor.
|
|
|
|
Post by 900dukess on Apr 26, 2011 11:51:45 GMT 1
Yer I was running a parkzone mustang motor, which is similar as the trojan. It is a great motor, lots of power with good run times. I recently swapped it over to a 35-36 and this motor rocks, lots of power etc. What esc / prop size u going to use. With mine I just used the stock esc and prop 9 x 7.5 from memory. You can get a three blade prop for the Trojan. I tried one on my previous set up and it was slower, but a lot more vertical pull. Note I replaced my motor due to wearing out the bearings and it took a plunge in the water after a funny story of trying out floats. I will add that story another day!
|
|
|
|
Post by NorCalAirman on Apr 26, 2011 12:22:20 GMT 1
Since you started your post with "Yer" I read the entire thing in a pirate voice. Kinda funny.
|
|
