Futaba receiver questions

[muttdog]

Been flying my SC for about 2 months now and have close to 20 flights. I am thinking of stepping up to aileron control as well as I want to start using a standard TX configuration. I have an old Futaba 6XSAs 6 channel radio from a never completed first project that is brand new in the box along with 2 extra super cub stock servos. The stock super cub servo leads to don fit into my futaba receiver. Is there an adapter cable available to fit? If so, all I need to add is a kurnigy 20A ESC and battery eliminator circuit to complete. AS far a electrics goes, am I missing anything? Plane is now completely stock

[flydiver]

The stock 5-wire servo are proprietary. There is no adapter.
Standard servos are 3-wire.

You will need a brushed ESC unless you plan to change the motor to brushless. In other word > change everything. There are LOTS of threads with this info.

[muttdog]

Yeah after more research I came to the same conclusion. NBD, micro servos are cheap. I am keeping the stock motor setup and will use 25A brushed ESC with 2A BEC to power 4 servos. My radio has ability for flaperons so I wanted to play with that as well. It's kinda addicting!!