FLy Sky transmitter (same as hobbyking)

[cubflyercameron]

Hi all,
I recently purchased a flysky transmitter from our local bidding site, Its exactly the same as the hobbyking ones.
I'm having a huge amount of trouble with it as i need to reverse the servos, so i plug it in go onto software and reverse them, BUT all the settings DO NOT save to the Transmitter! It is really bugging me and i haven't been able to fly my new Cessna 182
Any help would be greatly appreciated!

thanks!

[Dillzio]

after changing the servo reversal, are you sending the settings to the transmitter?
Once you send them to the transmitter they should be set on there. Rember that first you need to get the settings from the transmitter, then change them to what you want, then send them to the transmitter.

You should get the Digital Radio software for it, it makes programming much easier. At $2 for a registered version it's well worth it!

[scott]

To save settings you must push the menu button instead of the exit button after you enter the settings you want. Both buttons will take you back to the previous screen. Maybe you have already figured this out so it might be something else, but it took me a little while to understand this.

BTW. I just received my Turnigy a couple of days ago. I can't believe all the features and quality for the price. The lack of a good manual is frustrating at times, but then again once you figure something out on it, you tend to remember it. If your like me, I would have to flip back to the manual a couple of times before I remember something.

Anyway, don't give up. There were many times that a function would not work right for me. Turns out that I was entering things the wrong way (operator error).

I love my Turnigy 9x Tx so far!

[cubflyercameron]

thanks everyone
the transmitter package came with
-6ch transmitter
-6ch reciever
-little disk
-USB

the problem is the disk had nothing on it and my computer won't save the actual data to the transmitter because it doesnt recognize it, so it doesn't save, I've figured it has saved some things like throw but reversing seems to be a HUGE problem, ohwell I'll keep chipping away and try my hardest, to make it work
I'll report back if it works with your techniques


EDIT: Ok i've tried again but the computer won't pick up the transmitter so there is nothing to save the settings to. What should i be saving it to on the computer, should it say like Transmitter USB or something? do you have to run the driver i downloaded? Soo frustrating
Thanks

[scott]

thanks everyone
the transmitter package came with
-6ch transmitter
-6ch reciever
-little disk
-USB

Oops! Sorry I thought you were talking about the 9x.

I got out to the field and realized my ailerons were backwards on a new plane. Took about 30 seconds to reverse the servo with the Turnigy.

Well anyway, I am sure somebody here will be able to help you.