Convertion to 2.4GHz

[cruzer]

Hi,

I looking for advice on what parts are recommended for a SC conversion to 2.6ghz.

I will be converting to a Spektrum dx5 or dx6. I also will be using the HZ SC LP stock battery and motor.

What servos? Are there ones available that will fit better than other ones? And do I need to order different pull directions.

ESC? What brand, type, ect..

Also, if i am planning on adding ailerons in the future and I use say HT 55 servos will I need a more powerful battery to run the servos?

Thanks Rob

[threepdr]

This is exactly what I want to do. I hope someone answers you!

[flydiver]

Guys, do some reading in the threads.
This question gets asked all the time. In about 3 minutes you should be able to find a question exactly like or similar to yours and the same discussions, and recommendations will follow. There is no single answer. There is no best answer. There are a lot of ways to do this.
You'll learn a lot more.

[Gohmer]

I can tell you what I did except for the ESC. This one will be plenty:
www.rchotdeals.com/Products/rc/speed_controllers/BAS30C.html

Hitec HS 55 servo's

6110e RX

Stock battery will work fine

[akbushpilot]

Stock battery
30 amp 5 amp BEC (i think) for stock motor
the bnf servos are 3 wire those will work