|
|
Post by eastcoast78 on Mar 16, 2007 16:37:59 GMT 1
i here again gluing the bat box and noticed that whole motor and mounts pretty much everything in the motor area is not straight if i look at it from the front the whole Assembly is more to the right and pointing too the left?  is it supposed to be like this, its brand new never been flown ,i know the motor is supposed pointing down !!! some what right? so some help would be great here before i paint the plane |
|
|
|
Post by mrmugen on Mar 16, 2007 16:50:15 GMT 1
Everything is normal with your SC. It is like that for a reason. It prevents torque rolls from happening. Clear for take off!
|
|
|
|
Post by eastcoast78 on Mar 16, 2007 17:35:47 GMT 1
ohhhh what a releaf lol , i was starting to panick lol got her all tape up now and ready to paint ,thnxx mrmugen
|
|
|
|
Post by mrmugen on Mar 17, 2007 4:53:16 GMT 1
Glad to help pal. Have fun with it. Hope your painting goes a well as you hope. Just don't panic...lol. Kevin
|
|
|
|
Post by eastcoast78 on Mar 17, 2007 15:01:14 GMT 1
hey there, thnxx for the help, i just took off the prop and i tiped up the plane and a little white teflon washer ,its about the size of the little rubber like tubes that you put on the servo arm at the end to keep it together, well this little white washer fell on the floor i found it , but did'nt notice where it was on the plane ,does it go on the shaft first and then you tread on the prop ?
|
|
|
|
Post by mrmugen on Mar 17, 2007 15:16:07 GMT 1
It goes on before the first nut. It should be the first thing on the shaft. It goes like this....bare shaft-white tube like washer-flat nut (prop rides on)-prop-flat metal washer-flat nut-spinner
|
|
|
|
Post by eastcoast78 on Mar 17, 2007 17:21:45 GMT 1
perfect that the way i got.....thank you!!!
|
|
is it supposed to be like this, its brand new never been flown ,i know the motor is supposed pointing down !!! some what right? so some help would be great here before i paint the plane 
