|
|
Post by Dillzio on Aug 26, 2009 5:57:35 GMT 1
Hi all,
I've just got my GWS 10x6 props from hobbyking. When I put on the stock spinner, it doesn't seem to fit around the blades.
What do most people do about this? Do you have to get a special spinner to suit the blades, or do most people just trim the stock spinner to make it fit?
cheers,
-Dylan
|
|
|
|
Post by badlands on Aug 26, 2009 21:39:12 GMT 1
I used to trim the stock spinner - now i leave it off.
|
|
|
|
Post by gagallagher04401 on Aug 26, 2009 22:44:34 GMT 1
My spinner nose fits fine with those same props.
It should fit I think
|
|
|
|
Post by jvermast on Aug 28, 2009 14:29:57 GMT 1
I just trimmed mine a bit, no issues and it fits over all props I've tried.
|
|
|
|
Post by coreykoepsel on Aug 30, 2009 9:20:12 GMT 1
i just lost mine ,out in the desert
|
|
|
|
Post by Dillzio on Feb 16, 2010 4:16:17 GMT 1
I generally keep a few on hand, the nose cone must be my most replaced part on the plane. I was out flying a while ago, and found a nose cone on the ground in the grass- I must have lost it there a few weeks earlier!
The stock one that I thought didn't fit, was actually just worn out so that it wasn't gripping the thread tightly anymore. The prop saver also complicated matters by reducing the amount of thread sticking out past the prop so the spinner has more to grip on to.
|
|
