|
|
Post by dmelectronics on Mar 3, 2009 7:48:38 GMT 1
Just bought a Parkzone T-28 Trojan PNP, attached my Spektrum DX6i, changed out the wheels for 2 1/2" ones, and attached my flycamone2. Here's my vid.. www.vimeo.com/3439627 |
|
flyer88
Squadron leader
Flyer88
Posts: 165
|
Post by flyer88 on Mar 3, 2009 16:38:01 GMT 1
A word of advice: change the aileron servos out to Parkone digital servos. The aileron servos are junk, I've lost two planes to stripped servos in the wings.
The digital servos they have in the tail section of that plane are great servos and that's what I would replace the aileron servos with. If you look at them they have a metal cap where the control horn screws to, were the aileron servos are plastic.....junk !
You might need a extension lead, that's all. The servos are about $12 each, they are great, I also run them in other park flyers too.
Flyer88
Fly it low !!
|
|
wjcjr1
Flight lieutenant
Posts: 92
|
Post by wjcjr1 on Mar 3, 2009 22:30:59 GMT 1
Nice flying, nice video, good job.
Do you have two video cams or servo controlled rotation of the camera head?
Wayne
|
|
|
|
Post by dmelectronics on Mar 4, 2009 19:28:22 GMT 1
nope.. just mixed 3 different camera locations from a few flights into one video.
|
|
wjcjr1
Flight lieutenant
Posts: 92
|
Post by wjcjr1 on Mar 5, 2009 0:07:54 GMT 1
NICE! That is a great idea. You did it smoothly too.
Good Job.
Wayne
|
|
