|
|
Post by billmod12 on Dec 19, 2008 17:28:48 GMT 1
Whats gonna happen if I cut off a 1/2 to 3/4 of an inch off each end of my 10-8 stock prop? I know some of you have tried it! Thanks Bill
|
|
|
|
Post by admiralev on Dec 20, 2008 4:03:33 GMT 1
i wouldn't recommend that...
if you want to experiment with different kinds of props read through this section of the forum. there are many discussions on the very subject. if your still running a stock setup your options are limited anyways. you really wont gain any performance with a different prop on the stock setup. if you were to swap in a lipo or go brushless it would be a different story. then you would ahev to take a few things into consideration and see which option you like to fly with the best
admiral
|
|
