mrjb
Flying officer
Posts: 6
|
Post by mrjb on Dec 13, 2008 19:56:01 GMT 1
I am thinking of using a lipo from my honey bee king 2.
My HBking 2 came with a stock lipo balanced charger. Can I use this to charge larger lipo batteries.
The charger has a 3 and 4 pin connector. Do all lipos use this king of charging connector.
|
|
|
|
Post by mrmugen on Dec 14, 2008 2:42:24 GMT 1
It should say the output on the charger. I am sure it is at or under the amp rating of your battery. What is the capacity of your pack?
As long as the bigger packs amp rating are higher than the output of the charger (like say 1.2a charger and any battery over 1200mah will be fine.)
Not all lipo's use the same balance plug. You most likely have the eflite connector. If your new bigger packs have a different connector you can purchase an adapter to go from what you have to what you need. I use them daily for charging my packs since my chargers are all Thunder Power (which have their own connectors) and my packs have 3 different types of balance connectors.
Will try to find the link to the guy I buy all my adapters from. I know his name but am fuzzy on his business name.
Back in a few,
Kevin
|
|
|
|
Post by mrmugen on Dec 14, 2008 2:47:02 GMT 1
|
|
|
|
Post by flydiver on Dec 14, 2008 17:58:16 GMT 1
|
|
