Post by swimmer on Aug 14, 2008 14:39:49 GMT 1
Completing the aileron mod requiring two additional servo wires along with wiring for other servos, ESC, battery and RX I found the ebay in my SC becoming quite cluttered. Placing the lipo battery was somewhat difficult due to all the wiring as it velcros on top of the battery box. To clean up the wiring I placed a piece of velcro inside the battery box and affixed my AR6200 RX to it and routed the ESC, rudd/elev/aileron servo wires through the slots in the side of the battery box. The wire between the AR6200 receivers also runs to the box and the smaller of the two is velcroed to the inside of the ebay giving good distance between them. The result is an uncluttered ebay and easy installation/removal of the lipo and no fear of wiring becoming entangled in the servo linkage.
swimmer
swimmer