|
|
Post by capteasy on Apr 21, 2008 17:59:11 GMT 1
Hi,
Where can you order the "E-Flite 10x8E" or 10x7....? I can't seem to find it through Tower Hobby.
I read a review on the "GWS HD" 10x6 also but Tower didn't list it as a "HD".
Also do either of these need adapters?
Lots too learn....Thanks very much.
ce
|
|
aek42
Flying officer
Posts: 33
|
Post by aek42 on Sept 6, 2008 4:31:47 GMT 1
I have the same questions.
I bought an EFlite 10X8E and a GWS EP-1060. They both fit over the prop shaft and nicely onto the retainer nut. Great! The only problem is they do not have enough clearance with the cowl and cannot be turned. The Park Zone prop has a longer cylindrical shaft to which the blades attach and so clears the cowl.
What is the size of the retaining nut on the prop shaft? I do not have one that fits at home. With another two nuts I could mount the above new propellers so that they clear the cowl.
Thanks for help.
Alan
|
|
|
|
Post by duck9191 on Sept 6, 2008 5:07:58 GMT 1
horizonhobby.com has eflite props.
|
|
|
|
Post by spitfire on Sept 8, 2008 7:30:01 GMT 1
What is the size of the retaining nut on the prop shaft? I do not have one that fits at home. With another two nuts I could mount the above new propellers so that they clear the cowl. I used Dubro 4mm hex nuts and they fit it perfectly. The two extra nuts gives me the right clearance for the E-flite prop. |
|
