Secret to getting crisp lines and shapes

[bigtone]

Frisket is the secert to getting crisp lines and shapes while painting your foamie. After applying frisket film, use a sharpie to draw out your paint scheme on top of it. Use a hobby knife with a fresh #11 blade to cut the frisket. Have a steady hand when cutting to keep from scoring the foam too deeply. Mark the areas of the frisket you plan to peel from the foam with an "X" Use the tip of your hobby knife to pull up an edge of the area of frisket you want to remove. Don't gouge the foam with your knife when pulling up the corner of the frisket. Pick out your paint color and spary, after it dries pull the rest of the film off. Then apply more film and repeat the steps above to add another color. The film will not pull up the foam or paint do to it's low tack backing.

www.misterart.com/g998/Grafix-Frisket-Films.htm
www.misterart.com/g278/Grafix-Grafix-Prepared-Frisket-Film.htm

[mrmugen]

Thanks for the tip and the links.

[mrmugen]

I finally ordered some of that stuff. Now I need to shop for paint. I have been flying an all white bird for way too long.

[itchycods]

Thanks for the info! good stuff ;D