Changing Wheels ? Questions

[cubster]

hey Gang

Wanting to do the wheel upgrade to my SC, but still some questions I havent found answers too....

I know how to change the front, and add longer 'hubs' if wheels (new) need it...but the BACK rudder wheel has me stumped(im a dumbass,,lol)

what size do I buy for rear, and how do I fit it on ? do I mod up a new thing to mount the rear wheel? dont see any bigger rearwheel fitting...any help?

thanks!

love my SC!

[patmatgal]

I put a 1" Dubro on the rear. Had to wriggle the new wheel on the wire axle but it fit and loosened up fine. The one problem i ran into was that when i went out to test it i had dislodged the plastic washer (around the wire) from the plastic collar (from the tail) Thing would not turn but the servos were working, after fixing that all is well.

[l8again]

cubster...I used a Sullivan 1" rear...fit nicely on stock set up. Part # SUL352

[frazer1981]

I went for a dubros 1'' 1/4 lite foam and 2 1/2'' for my front wheels and my lady rolls out perfectly!!!

[parkpilot]

I use a 1" solid rubber wheel on the back for durability. It makes the SC a lot more manoverable on the ground