dakota
Flying officer
Posts: 1
|
Post by dakota on Jul 29, 2016 15:10:26 GMT 1
Put a new cowl on my supercub and now when I move the right stick, which controls elevator and rudder, the rudder and elevator move at the same time. Before up and down and left controlled the elevator and left and right was the rudder function. any thoughts? New to the rc toys. tia
|
|
|
Post by hghost on Jul 30, 2016 0:57:55 GMT 1
??
new one on me...changing a cowl , then controls crazy ?
Got to be something in the connections..lose wires.....I would start there
|
|
|
Post by flydiver on Jul 30, 2016 16:36:02 GMT 1
You must have done more than just replace the cowl. To need to do that you crashed. How hard? How much collateral damage? Did you unplug any wires from anywhere? The placement is not arbitrary, it's very specific.
If the motor was stopped because of the accident and you still had the transmitter throttle ON, that causes a short in the motor and can fry the speed control, which is also part of the flight controls.
|
|