|
|
Post by jtank78 on Mar 8, 2012 9:20:26 GMT 1
I just got the super cub lp and I have a question! I have a dx 5e and want to know if I turn all the switches in the middle of the transmitter to normal. ( dont reverse any switch right?) I have flown the champ for a while now and that is the set up on the Transmitter i am used to!! hopefully everyone knows what I mean by reverse the controlls:0) thank you and cant waite to hear from you:)
|
|
|
|
Post by flydiver on Mar 8, 2012 16:18:47 GMT 1
Switch position will be dependent on each individual plane. The switch goes in whatever position to get the proper control surface action.
|
|
|
|
Post by larkshead on Mar 8, 2012 20:02:04 GMT 1
I have the DX5e also and all of my controls are set to "norm". But flydiver is right - verify all movements while you are on the ground.
Regards,
-Peter
|
|
|
|
Post by flydiver on Mar 8, 2012 22:13:52 GMT 1
Clarification - by each individual plane I meant any plane that you may have bound to the TX.
A Cub would be totally different from an elevon jet.
A modified Cub would be likely different from a stock Cub.
Theoretically stock Cubs would be the same but, verify, do not assume.
|
|
