Post by polo05 on Apr 15, 2007 5:53:40 GMT 1
Hey guys, im getting in deep here and just wanted to know if what I am understanding is correct. I want this plane: Edge 540 Combo/ 480 BL motor.
The motor, here, is I think plenty to learn aerobatics on. But I need to fill in the blanks.
I just bought a DX-6 with A6000 reciever and 4 S75 servos. I need an ESC, Battery, and Charger. So does this sound logical?
Motor: Park 480 BL Outrunner Motor, 1020Kv (EFLM1505)
ESC: ICS600 ESC, 30/45 Amp ESC: JR
Battery: 11.1v 2100mah 20C Li-Po like this
If I added right the bat can provide 42 Amps max so the ESC should be ok. But even at 30 Amps will the BEC be ok to provide power for 4 servos?
or do i have to run an external BEC?
Hope I explained it well enough,
POLO
The motor, here, is I think plenty to learn aerobatics on. But I need to fill in the blanks.
I just bought a DX-6 with A6000 reciever and 4 S75 servos. I need an ESC, Battery, and Charger. So does this sound logical?
Motor: Park 480 BL Outrunner Motor, 1020Kv (EFLM1505)
ESC: ICS600 ESC, 30/45 Amp ESC: JR
Battery: 11.1v 2100mah 20C Li-Po like this
If I added right the bat can provide 42 Amps max so the ESC should be ok. But even at 30 Amps will the BEC be ok to provide power for 4 servos?
or do i have to run an external BEC?
Hope I explained it well enough,
POLO