ronzo
Flying officer
Posts: 12
|
Post by ronzo on Feb 16, 2008 18:47:46 GMT 1
Just got my new lipo for my SC plugged it in and what a difference it made. Now nothing at all works. Would it be possible that I could of burnt some out.It's a 1500mAh, 11.1V, 20c, 3S
Sure hope I didn't wreck my SC.
Thanks
Ronzo
|
|
|
|
Post by flyinghigh on Feb 16, 2008 18:56:01 GMT 1
It's possible. I think we need a little more info. Did you plug it in one day and nothing worked? Were you flying and it quit working?
Open up the "Black Box" and see what you can find. Maybe it's as simple as your crystal is lose.
|
|
ronzo
Flying officer
Posts: 12
|
Post by ronzo on Feb 16, 2008 20:09:05 GMT 1
Sorry there wasn't enough info, First I put deans on the plane, the lipo came with them. Then I plug in the battery just to see how it worked, it worked great. Took the battery back out so I could start to fit the lipo into the compartment. Now when I went back to test every thing, nothing worked at all. The crystal is still in place. And didn't try flying yet.
Thanks
Ronzo
|
|
|
|
Post by SCC on Feb 16, 2008 21:00:29 GMT 1
Have you checked your soldering on the Deans?
|
|
ronzo
Flying officer
Posts: 12
|
Post by ronzo on Feb 16, 2008 21:08:52 GMT 1
Yes, everything worked fine the first time. I'm double checking every thing again
Thanks
|
|
|
|
Post by SCC on Feb 16, 2008 21:20:04 GMT 1
Ron
How long did you run it for the first time? Did you remove the jumper?
|
|
ronzo
Flying officer
Posts: 12
|
Post by ronzo on Feb 16, 2008 21:52:05 GMT 1
What about the wires? I noticed the wires coming from the black box are maybe 16 gage? the dean extension is 12 gage. would that make a difference?
Ronzo
|
|
ronzo
Flying officer
Posts: 12
|
Post by ronzo on Feb 17, 2008 14:29:16 GMT 1
OK getting closer, 1 wire connected to the dean is shorting out, If moved it'll go on. Is there any way to test connections were I solder?
Thanks
Ronzo
|
|
