|
|
Post by iflyforfun on Sept 12, 2010 10:46:49 GMT 1
flydiver, thanks for the explanation on the batteries and LVC. My LVC is set for medium (2.8V). I can program it for High(3.1V) I think that should be a little safer. If I have issues again I will just start using the built in timer on my DX6i. Thanks
|
|
|
|
Post by flydiver on Sept 12, 2010 16:02:12 GMT 1
I use Castle Creations, set them for 3.5v and then try not to hit it.
I'm pretty conservative with my lipos.
|
|
|
|
Post by iflyforfun on Sept 12, 2010 20:56:39 GMT 1
I use Castle Creations, set them for 3.5v and then try not to hit it. I'm pretty conservative with my lipos. My ESC only has a Low,medium and High setting for the LVC  with the high being 3.1V Again something new I have learned from you is looking for a good quality ESC that lets the user choose the voltage he wants. Ill keep my eyes open next time I'm looking for a ESC!!! For now I will set it for High, and monitor the Voltages after each flight. If I find any of my batteries going below 3V I will start using my timer and pick a conservative time that will not put my cells at risk. Thanks Again Ifly |
|
with the high being 3.1V