|
|
Post by aph1255 on Apr 29, 2009 3:25:35 GMT 1
I have purchased a DX 6 used almost new. The problem im having is the throttle stick is on the right side and ruder and elevator controls on left. How do you switch so the throttle is on left and other controls are on right. Any help would be great as I am a new to all this. I have a cub with eflight 450 brushless....Thanks
|
|
|
|
Post by Ellis on Apr 29, 2009 4:51:14 GMT 1
Sounds like you got the Euro model - mode 1.
Have you tried plugging the throttle into the elevator position is on the RX?
Don't know if it will work (might fry something). Check out RC Groups on-line for info.
|
|
|
|
Post by mrmugen on Apr 29, 2009 5:02:25 GMT 1
Contact horizon....ask if the sticks can be swapped around. I had an old futaba back in the 80's (radio was about a early 70's model) that I did this with. Got the radio free so I figured what the heck. This was an old box radio with lots of room inside....might not be as lucky with the new ergonomics in radio cases. Worth calling horizon tech over though. It's a free call.
Kevin
|
|
